Pubblicazioni - Ciro Santus

2026

T. Grossi, P. Neri, C. Santus. “Improved residual stress evaluation with Hole-Drilling and DIC through the L-curve tool and super-resolution along depth”. Measurement. Vol.258, Part C, art.119331, pp.1-16, 2026. DOI: 10.1016/j.measurement.2025.119331

2025

L. Romanelli, C. Santus, P. Neri, S. Murchio, M. Benedetti, E. Dereli, M. Greiner, C. Mittelstedt. “Elastic–plastic homogenization of additively manufactured F2CCZ cells”. International Journal of Mechanical Sciences. Vol.305, art.110763, pp.1-27, 2025. DOI: 10.1016/j.ijmecsci.2025.110763
N. M. Gebre, R. De Biasi, D. A. Rita, C. Santus, L. Romanelli, P. Neri, M. Perini, F. Berto, M. Benedetti. “Towards standardization of tensile testing for strut-based lattices using compensated beam modeling and strain-energy-based optimization”. Materials & Design. Vol.258, art.114696, pp.1-17, 2025. DOI: 10.1016/j.matdes.2025.114696
L. Romanelli, C. Santus, G. Macoretta, M. Barsanti, B. D. Monelli, I. Senegaglia, A. H. A. Lutey, H. Rajaei, C. Menapace, M. Benedetti. “A TCD-based statistical method to assess the impact of surface roughness and pores on the fatigue strength of LPBF Inconel 718 specimens”. International Journal of Fatigue. Vol.194, art.108821, pp.1-24, 2025. DOI: 10.1016/j.ijfatigue.2025.108821
L. Romanelli, C. Santus, I. Senegaglia, F. Tamburrino, M. Controzzi, A. Corrado, M. Perini, D. Kumar, R. De Biasi, M. Benedetti. “Lightweight design of polymeric thin-walled components: Latticization and elastic–plastic homogenization”. Journal of Materials Research and Technology. Vol.36, pp.2977-2993, 2025. DOI: 10.1016/j.jmrt.2025.03.137
M. Pedranz, V. Fontanari, R. De Biasi, F. Berto, C. Santus, M. Benedetti. “A simplified strain energy density approach for multiaxial fatigue predictions”. International Journal of Mechanical Sciences. Vol.288, art.109961, pp.1-18, 2025. DOI: 10.1016/j.ijmecsci.2025.109961
T. Inoue, N. Sakurai, C. Santus, L. Romanelli, S. Bhukya. “Fatigue Strength Evaluation of a Variety of Drill Pipes for Challenging Drilling in 7000 m Water Depths, IODP Expedition JTRACK”. SPE – International Association of Drilling Contractors Drilling Conference Proceedings, SPE/IADC-223731-MS, 2025. DOI: 10.2118/223731-MS
L. Romanelli, C. Santus, M. Controzzi, R. De Biasi, M. Benedetti. “Homogenization of Polymeric Thin-Walled Lattice Structures under Elastic-Plastic Loading”. The Fifth International Conference on Simulation for Additive Manufacturing. Pavia, 9-11 Settembre 2025. sim-am2025.cimne.com
L. Romanelli, C. Santus, P. Neri, S. Murchio, M. Benedetti, E. Dereli, M. Greiner, C. Mittelstedt. “Experimental and numerical analyses of elastic-plastic behaviour of AlSi10Mg F2CCZ lattice units”. The Fifth International Conference on Simulation for Additive Manufacturing. Pavia, 9-11 Settembre 2025. sim-am2025.cimne.com
L. Romanelli, C. Santus, M. Controzzi, R. De Biasi, M. Benedetti. “Elastic-plastic homogenization of polymeric thin-walled lattice structures for prototypal structural applications”. Materials Today Conference 2025. Sitges, Spain, 23-26 Giugno 2025. Materials Today Conference
M. Benedetti, D. Menel, R. De Biasi, L. Romanelli, I. Senegaglia, C. Santus, F. Napoleoni, P. Borracci, M. Controzzi. “Design and Additive Manufacturing of a Lattice-Based, Ultra-Light Forearm Prosthesis”. 4th Asia-Pacific International Conference on Additive Manufacturing. Melbourne, Australia, 30 Giugno – 3 Luglio 2025. apicam2025.com.au
R. De Biasi, L. Romanelli, C. Santus, M. Perini, F. Berto, M. Benedetti. “On the characterization of fatigue resistance of PA12 lattice structures”. 5th International Symposium on Fatigue Design and Material Defects. Trento, 14-16 Maggio 2025. Fatigue Design and Material Defects 2025
L. Romanelli, C. Santus, G. Macoretta, C. Menapace, M. Benedetti. “Combining the theory of critical distances and the extreme value statistics to interpret the effects of surface roughness and pores on the fatigue strength of Inconel 718 specimens”. 5th International Symposium on Fatigue Design and Material Defects. Trento, 14-16 Maggio 2025. Fatigue Design and Material Defects 2025
N. M. Gebre, R. De Biasi, L. Romanelli, P. Neri, C. Santus, M. Benedetti, F. Berto. “An Average Strain Energy Density-based optimization procedure for design standardized tensile lattice specimens”. IGF28 – MedFract3. Catania and online, 15-18 Settembre 2025. igf28-medfract3.eu
L. Romanelli, C. Santus, G. Macoretta, M. Barsanti, B. D. Monelli, I. Senegaglia, A. H. A. Lutey, H. Rajaei, C. Menapace, M. Benedetti. “A Combined Approach Using Critical Distance Theory and Extreme Value Statistics to Assess the Impact of Surface Roughness and Pores on the Fatigue Strength of Inconel 718”. IGF28 – MedFract3. Catania and online, 15-18 Settembre 2025. igf28-medfract3.eu
L. Romanelli, C. Santus, G. Macoretta, M. Barsanti, B. D. Monelli, I. Senegaglia, A. H. A. Lutey, H. Rajaei, C. Menapace, M. Benedetti. “Un approccio statistico basato sulla teoria della distanza critica per valutare l’effetto delle porosità e della rugosità superficiale per provini di Inconel 718 ottenuti tramite tecnica LPBF”. 54° Convegno AIAS. Firenze, 3-6 Settembre 2025.
T. Grossi, P. Neri, C. Santus, A. Benincasa, E. Boccini. “Misure di tensioni residue non uniformi mediante metodo del foro incrementale e Digital Image Correlation: uno studio di fattibilità su provini rullati”. 54° Convegno AIAS. Firenze, 3-6 Settembre 2025.
T. Grossi, P. Neri, C. Santus, A. Benincasa, S. Gulisano. “Un algoritmo di determinazione dello zero di profondità in misure di tensioni residue con metodo del foro su materiali non conduttivi”. 54° Convegno AIAS. Firenze, 3-6 Settembre 2025. Presentazione PDF
C. Santus, L. Bertini, M. Beghini, L. Romanelli, A. Burchianti. “BANCO PROVA A FATICA FLESSIONALE IN RISONANZA CON POSIZIONE DEI SUPPORTI AD INSEGUIMENTO CONTROLLATO”. Brevetto Italiano, numero di deposito: 102023000020259, deposito 02/10/2023, pubblicazione 02/04/2025, concessione 13/10/2025. Banca dati UIBM — 102023000020259

2024

M. Beghini, L. Bertini, M. Cococcioni, T. Grossi, C. Santus, A. Benincasa. “Regularization of Hole-Drilling Residual Stress Measurements with Eccentric Holes: An Approach with Influence Functions”. Journal of Materials Engineering and Performance. Vol.33(15), pp.7652-7658, 2024. DOI: 10.1007/s11665-024-09447-x
C. Santus, P. Neri, L. Romoli, M. Cococcioni. “Residual Stress Determination with the Hole-Drilling Method on FDM 3D-Printed Precurved Specimen through Digital Image Correlation”. Applied Sciences. Vol.14(10), art.3992, pp.1-25, 2024. DOI: 10.3390/app14103992
C. Santus, L. Romanelli, L. Bertini, A. Burchianti, T. Inoue. “Resonant Fatigue Tests on Polished Drill Pipe Specimens”. Machines. Vol.12(5), art.314, pp.1-19, 2024. DOI: 10.3390/machines12050314 — Articolo selezionato nella Editor’s Choice della rivista: Editor’s Choice Articles, Machines – MDPI
G. Macoretta, L. Romanelli, C. Santus, L. Romoli, A. H. A. Lutey, F. Uriati, G. Nicoletto, S. Raghavendra, M. Benedetti, B. D. Monelli. “Modelling of the surface morphology and size effects on fatigue strength of L-PBF Inconel 718 by comparing different testing specimens”. International Journal of Fatigue. Vol.181, art.108120, pp.1-18, 2024. DOI: 10.1016/j.ijfatigue.2023.108120
C. Santus, L. Romanelli, T. Grossi, P. Neri. “Determination of Chaboche and Bouc-Wen parameters for quenched and tempered steel”. Journal of Theoretical and Applied Mechanics (Poland). Vol.62(3), pp.507-519, 2024. DOI: 10.15632/jtam-pl/188526
M. Pedranz, V. Fontanari, C. Santus, F. Zanini, S. Carmignato, D. Lusuardi, F. Berto, M. Benedetti. “A comparative investigation on the uniaxial plain and notch fatigue strengths of heavy-section castings made of pearlitic and high-silicon ferritic ductile cast irons”. Proceedings of the 9th Engineering Integrity Society International Conference on Durability & Fatigue. Vol.I, pp.103-114. Fatigue 2024, Jesus College, Cambridge (UK), 19-21 June 2024. DOI: 10.5281/zenodo.12705062
G. Macoretta, L. Romanelli, C. Santus, L. Romoli, A.H.A. Lutey, F. Uriati, M. Benedetti, B.D. Monelli. “Modellazione dell’effetto della rugosità superficiale e dell’effetto scala per provini di Inconel 718 di differenti dimensioni e prodotti tramite tecnica L-PBF”. 53° Convegno AIAS. Napoli 2024.
C. Santus, L. Romanelli, A. Burchianti. “Test a fatica su elementi tubolari per la perforazione soggetti a corrosione e successiva lucidatura”. 53° Convegno AIAS. Napoli 2024. Presentazione PDF

2023

M. Abruzzo, M. Beghini, L. Romoli, C. Santus. “Design for manufacturing of a spur gears profile modification based on the static transmission error for improving the dynamic behavior”. International Journal of Advanced Manufacturing Technology. Vol.129(5-6), pp.1999–2010, 2023. DOI: 10.1007/s00170-023-12340-x
S. A. Cancemi, R. Lo Frano, C. Santus, T. Inoue. “Unsupervised anomaly detection in pressurized water reactor digital twins using autoencoder neural networks”. Nuclear Engineering and Design. Vol.413, art.112502, pp.1-11, 2023. DOI: 10.1016/j.nucengdes.2023.112502
M. Pedranz, V. Fontanari, C. Santus, D. Lusuardi, F. Berto, M. Benedetti. “A strain energy density design approach for large cast iron components: From microstructural analysis to multiaxial fatigue response”. International Journal of Fatigue. Vol.175, art.107824, pp.1-33, 2023. DOI: 10.1016/j.ijfatigue.2023.107824
C. Santus, L. Romanelli, T. Grossi, L. Bertini, L. Le Bone, F. Chiesi, L. Tognarelli. “Elastic–plastic analysis of high load ratio fatigue tests on a shot-peened quenched and tempered steel, combining the Chaboche model and the Theory of Critical Distances”. International Journal of Fatigue. Vol.174, art.107713, pp.1-15, 2023. DOI: 10.1016/j.ijfatigue.2023.107713
C. Santus, L. Romanelli, A. Burchianti, T. Inoue. “Resonant Fatigue Tests on Drill Pipe Connections with Different Geometries and Sizes”. Applied Sciences. Vol.13(14), art.8006, pp.1-20, 2023. DOI: 10.3390/app13148006
M. Pedranz, V. Fontanari, S. Raghavendra, C. Santus, F. Zanini, S. Carmignato, D. Lusuardi, F. Berto, M. Benedetti. “A new energy based highly stressed volume concept to investigate the notch-pores interaction in thick-walled ductile cast iron subjected to uniaxial fatigue”. International Journal of Fatigue. Vol.169, art.107491, pp.1-18, 2023. DOI: 10.1016/j.ijfatigue.2022.107491
C. Santus, L. Romanelli, T. Grossi, L. Bertini, P. Neri, L. Le Bone, F. Chiesi, L. Tognarelli. “Investigation of Chaboche and Bouc–Wen Parameters of Quenched and Tempered Steel and Comparison of Model Predictive Capabilities”. Applied Sciences. Vol.13(5), art.2961, pp.1-23, 2023. DOI: 10.3390/app13052961
M. Beghini, T. Grossi, M. B. Prime, C. Santus. “Ill-Posedness and the Bias-Variance Tradeoff in Residual Stress Measurement Inverse Solutions”. Experimental Mechanics. Vol.63(3), pp.495-516, 2023. DOI: 10.1007/s11340-022-00928-5
M. Abruzzo, M. Beghini, C. Santus, F. Presicce. “A dynamic model combining the average and the local meshing stiffnesses and based on the static transmission error for spur gears with profile modification”. Mechanism and Machine Theory. Vol.180, art.105139, pp.1-21, 2023. DOI: 10.1016/j.mechmachtheory.2022.105139
C. Santus, T. Grossi, L. Romanelli, M. Pedranz, M. Benedetti. “A computationally fast and accurate procedure for the identification of the Chaboche isotropic-kinematic hardening model parameters based on strain-controlled cycles and asymptotic ratcheting rate”. International Journal of Plasticity. Vol.160, art.103503, pp.1-34, 2023. DOI: 10.1016/j.ijplas.2022.103503
M. Beghini, T. Grossi, C. Santus, L. Seralessandri, S. Gulisano. “Residual stress measurements on a deep rolled aluminum specimen through X-Ray Diffraction and Hole-Drilling, validated on a calibration bench”. IOP Conf. Series: Materials Science and Engineering. Vol.1275, art.012036, pp.1-8, 2023. DOI: 10.1088/1757-899X/1275/1/012036
L. Romanelli, C. Santus, T. Grossi, M. Pedranz, M. Benedetti. “Efficient procedure for the identification of the Chaboche isotropic-kinematic hardening model parameters”. International Conference on Plasticity, Damage, and Fracture 2023 – ICPDF 2023. 3-9 January 2023, Barcelo Bavaro Punta Cana, Dominican Republic. Presentazione PDF
M. Beghini, T. Grossi, C. Santus. “Validation of a strain gauge rosette setup on a cantilever specimen: Application to a calibration bench for residual stresses”. Materials Today: Proceedings. Vol.93, pp.719–724, 2023. DOI: 10.1016/j.matpr.2023.05.505
C. Santus, T. Grossi, M. Beghini, L. Bertini. “Determinazione del campo di spostamenti ottenuto come integrazione di funzioni di influenza per l’uso della tecnica DIC, con il metodo del foro, al fine dell’analisi delle tensioni residue”. 52° Convegno AIAS. Genova 2023.

2022

M. Abruzzo, M. Beghini, C. Santus. “Mechanical energy dissipation due to the propagation of elastic waves during the lateral impact of elastic cylinders”. Journal of Sound and Vibration. Vol.535, art.117075, pp.1-17, 2022. DOI: 10.1016/j.jsv.2022.117075
P. Neri, A. Paoli, A. V. Razionale, C. Santus. “Low-speed cameras system for 3D-DIC vibration measurements in the kHz range”. Mechanical Systems and Signal Processing. Vol.162, art.108040, pp.1-14, 2022. DOI: 10.1016/j.ymssp.2021.108040
C. Santus, L. Romanelli, T. Grossi, P. Neri, L. Romoli, A. H. A. Lutey, M. Pedranz, M. Benedetti. “Torsional-loaded notched specimen fatigue strength prediction based on mode I and mode III critical distances and fracture surface investigations with a 3D optical profilometer”. International Journal of Fatigue. Vol.161, art.106913, pp.1-14, 2022. DOI: 10.1016/j.ijfatigue.2022.106913
M. Benedetti, C. Santus, S. Raghavendra, D. Lusuardi, F. Zanini, S. Carmignato. “Multiaxial plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: Combining multiaxial fatigue criteria, theory of critical distances, and defect sensitivity”. International Journal of Fatigue. Vol.156, art.106703, pp.1-13, 2022. DOI: 10.1016/j.ijfatigue.2021.106703
M. Benedetti, M. Pedranz, F. Berto, C. Santus. “Inverse determination and probability distribution of the mode III strain energy density control radius with an optimized V-notched specimen under torsional fatigue loading”. International Journal of Fatigue. Vol.159, art.106787, pp.1-17, 2022. DOI: 10.1016/j.ijfatigue.2022.106787
M. Beghini, T. Grossi, C. Santus. “Validation of a strain gauge rosette setup on a cantilever specimen: Application to a calibration bench for residual stresses”. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics. DAS 2022. DOI: 10.1016/j.matpr.2023.05.505
M. Beghini, T. Grossi, C. Santus, E. Valentini. “A calibration bench to validate systematic error compensation strategies in hole drilling measurements”. 11th International Conference on Residual Stresses. ICRS11, Nancy, France, 27-30 March 2022. DOI: 10.36227/techrxiv.20347788
M. Beghini, T. Grossi, C. Santus, A. Torboli, A. Benincasa, M. Bandini. “X-Ray Diffraction and Hole-Drilling residual stress measurements of shot peening treatments validated on a calibration bench”. 14th International Conference on Shot Peening. ICSP-14, Milan, Italy, 04-07 September 2022.
M. Beghini, T. Grossi, C. Santus. “On the Combined Effects of Hole Depth Steps and Tikhonov Regularization on Hole-Drilling Measurements”. 2022 SEM Annual Conference and Exposition on Experimental and Applied Mechanics. Pittsburgh PA, USA, 13-16 June 2022.
P. Neri, A. Paoli, C. Santus. “Bandpass high frequency blisk vibration measurements by down-sampled stereo-DIC acquisitions”. Proceedings of ISMA2022 International Conference on Noise and Vibration Engineering, pp.2892-2903. Leuven, Belgium, 12-14 September 2022.
C. Santus, L. Romanelli, T. Grossi, L. Bertini, M. Benedetti, L. Le Bone, F. Chiesi, L. Tognarelli. “Procedura di determinazione dei parametri di Chaboche di un acciaio con comportamento elasto-plastico in regime di fatica ad alto numero di cicli”. 51° Convegno AIAS. Padova 2022. Presentazione PDF

2021

P. Neri, A. Paoli, C. Santus. “Stereo-DIC Measurements of a Vibrating Bladed Disk: In-Depth Analysis of Full-Field Deformed Shapes”. Applied Sciences. Vol.11(12), art.5430, pp.1-12, 2021. DOI: 10.3390/app11125430
M. Benedetti, C. Menapace, V. Fontanari, C. Santus. “On the variability in static and cyclic mechanical properties of extruded 7075-T6 aluminum alloy”. Fatigue and Fracture of Engineering Materials and Structures. Vol.44(11), pp.2975–2989, 2021. DOI: 10.1111/ffe.13530
M. Benedetti, C. Santus, V. Fontanari, D. Lusuardi, F. Zanini, S. Carmignato. “Plain and notch fatigue strength of thick-walled ductile cast iron EN-GJS-600-3: A double-notch critical distance approach to defect sensitivity”. International Journal of Fatigue. Vol.152, art.106414, pp.1-15, 2021. DOI: 10.1016/j.ijfatigue.2021.106414
C. Santus, F. Berto, M. Pedranz, M. Benedetti. “Mode III critical distance determination with optimized V-notched specimen under torsional fatigue and size effects on the inverse search probability distribution”. International Journal of Fatigue. Vol.151, art.106351, pp.1-18, 2021. DOI: 10.1016/j.ijfatigue.2021.106351
M. Abruzzo, M. Beghini, C. Santus, S. Manconi. “Dynamic behavior of a power re-circulating gear test rig including periodic variation of mesh stiffness and static transmission error”. Mechanism and Machine Theory. Vol.159, art.104247, pp.1-19, 2021. DOI: 10.1016/j.mechmachtheory.2021.104247
P. Neri, A. Paoli, Razionale, A. V., C. Santus. “Time-domain image filtering for DIC vibration measurements”. Journal of Physics: Conference Series. Vol.2041(1), art.012008, pp.1-9, 2021. DOI: 10.1088/1742-6596/2041/1/012008
M. Benedetti, V. Fontanari, D. Odorizzi, C. Santus, D. Lusuardi. “Plain and notch fatigue strength of ductile cast iron GJS600: The role of defect sensitivity”. Procedia Structural Integrity. Vol.39, pp.65-70, 2021. DOI: 10.1016/j.prostr.2022.03.073
C. Santus, P. Neri, L. Romoli, A. Lutey, S. Raghavendra, M. Benedetti. “Fatigue fracture surface investigations with a 3D optical profiler”. Procedia Structural Integrity. Vol.39, pp.450-459, 2021. DOI: 10.1016/j.prostr.2022.03.114 Presentazione PDF

2020

M. Benedetti, M. Dallago, C. Santus. “Statistical significance of notch fatigue prognoses based on the strain-energy–density method: Application to conventionally and additively manufactured materials”. Theoretical and Applied Fracture Mechanics. Vol.109, art.102720, pp.1-19, 2020. DOI: 10.1016/j.tafmec.2020.102720
M. Benedetti, C. Santus. “Statistical properties of threshold and notch derived estimations of the critical distance according to the line method of the theory of critical distances”. International Journal of Fatigue. Vol.137, art.105656, pp.1-19, 2020. DOI: 10.1016/j.ijfatigue.2020.105656
M. Benedetti, C. Santus. “Building the Kitagawa-Takahashi diagram of flawed materials and components using an optimized V-notched cylindrical specimen”. Engineering Fracture Mechanics. Vol.224, art.106810, pp.1-10, 2020. DOI: 10.1016/j.engfracmech.2019.106810
C. Santus, A. Burchianti, T. Inoue, H. Ishiguro. “Fatigue resonant tests on S140 and S150 grade corroded drill pipe connections and pipe bodies”. International Journal of Pressure Vessels and Piping. Vol.184, art.104107, pp.1-14, 2020. DOI: 10.1016/j.ijpvp.2020.104107
M. Benedetti, F. Berto, L. Le Bone, C. Santus. “A novel Strain-Energy-Density based fatigue criterion accounting for mean stress and plasticity effects on the medium-to-high-cycle uniaxial fatigue strength of plain and notched components”. International Journal of Fatigue. Vol.133, art.105397, pp.1-19, 2020. DOI: 10.1016/j.ijfatigue.2019.105397
S. Barone, P. Neri, A. Paoli, A. V. Razionale, L. Bertini, C. Santus. “Optical Stereo-System for Full-Field High-Frequency 3D Vibration Measurements Based on Low-Frame-Rate Cameras”. Design Tools and Methods in Industrial Engineering. ADM 2019. Lecture Notes in Mechanical Engineering. Springer, Cham, pp.155-164, 2020. DOI: 10.1007/978-3-030-31154-4_14
M. Benedetti, C. Santus. “Statistical evaluation of the critical distance in the finite life fatigue regime”. Procedia Structural Integrity. Vol.28, pp.702-709, 2020. DOI: 10.1016/j.prostr.2020.10.081 Presentazione PDF Video YouTube

2019

P. Neri, L. Bertini, C. Santus, A. Guglielmo. “Generalized SAFE Diagram for Mistuned Bladed Disks”. Journal of Engineering for Gas Turbines and Power – ASME. Vol.141(11), art.111020, pp.1-9, 2019. DOI: 10.1115/1.4045078
M. Benedetti, C. Santus. “Mean stress and plasticity effect prediction on notch fatigue and crack growth threshold, combining the theory of critical distances and multiaxial fatigue criteria”. Fatigue & Fracture of Engineering Materials & Structures. Vol.42(6), pp.1228-1246, 2019. DOI: 10.1111/ffe.12910
M. Benedetti, C. Santus, F. Berto. “Inverse determination of the fatigue Strain Energy Density control radius for conventionally and additively manufactured rounded V-notches”. International Journal of Fatigue. Vol.126, pp.306-318, 2019. DOI: 10.1016/j.ijfatigue.2019.04.040
M. Benedetti, C. Santus. “Notch fatigue and crack growth resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting: A critical distance approach to defect sensitivity”. International Journal of Fatigue. Vol.121, pp.281-292, 2019. DOI: 10.1016/j.ijfatigue.2018.12.020
M. Beghini, L. Bertini, A. Giri, C. Santus, E. Valentini. “Measuring residual stress in finite thickness plates using the hole-drilling method”. Journal of Strain Analysis for Engineering Design. Vol.54(1), pp.65-75, 2019. DOI: 10.1177/0309324718821832
C. Santus. “Initial orientation of the fretting fatigue cracks in shrink-fit connection specimens”. 6th International Conference on Crack Paths, Verona, Italy, 19-21 September 2018. Frattura ed Integrità Strutturale. Vol.13(48), pp.442-450, 2019. DOI: 10.3221/IGF-ESIS.48.42 Presentazione PDF
P. Neri, C. Santus. “STINGER”. Brevetto Italiano, numero di deposito: 102017000129334, deposito 13/11/2017, pubblicazione 14/05/2019, concessione 29/01/2020. Banca dati UIBM — 102017000129334

2018

M. Barsanti, M. Beghini, C. Santus, A. Benincasa, L. Bertelli. “Integral method coefficients for the ring-core technique to evaluate non-uniform residual stresses”. Journal of Strain Analysis for Engineering Design. Vol.53(4), pp.210-224, 2018. DOI: 10.1177/0309324718760438
C. Santus, L. Bertini, A. Burchianti, T. Inoue, N. Sakurai. “Fatigue resonant tests on drill collar rotary shouldered connections and critical thread root identification”. Engineering Failure Analysis. Vol.89, pp.138-149, 2018. DOI: 10.1016/j.engfailanal.2018.02.027
C. Santus, D. Taylor, M. Benedetti. “Determination of the fatigue critical distance according to the Line and the Point Methods with rounded V-notched specimen”. International Journal of Fatigue. Vol.106, pp.208-218, 2018. DOI: 10.1016/j.ijfatigue.2017.10.002
C. Santus, D. Taylor, M. Benedetti. “Experimental determination and sensitivity analysis of the fatigue critical distance obtained with rounded V-notched specimens”. International Journal of Fatigue. Vol.113, pp.113-125, 2018. DOI: 10.1016/j.ijfatigue.2018.03.037
A. Piccinocchi, F. Simoncini, M. Beghini, C. Santus. “La sicurezza del cilindro monolucido in acciaio nelle cartiere: procedura per la valutazione della resistenza a fatica”. Congresso SAFAP 2018. Bologna 2018.
C. Santus, D. Taylor, M. Benedetti. “Sensibility analysis of the fatigue critical distance values assessed by combining plain and notched cylindrical specimens”. Procedia Structural Integrity. Vol.8, pp.67-74, 2018. DOI: 10.1016/j.prostr.2017.12.008 Presentazione PDF
M. Benedetti, C. Santus. “Crack path and notch fatigue strength of Ti-6Al-4V ELI additively manufactured via selective laser melting: Defect sensitivity”. 6th International Conference on Crack Paths, Verona, Italy, 19-21 September 2018, pp.141-146, 2018. Presentazione PDF
G. Macoretta, B. D. Monelli, L. Bertini, C. Santus, M. Beghini, E. Scrinzi, N. Pieroni. “High temperature fatigue behavior of GT blades in the trailing edge root”. Turbomachines 2018, Prague, 25-26 September 2018.
B. D. Monelli, G. Macoretta, M. Beghini, L. Bertini, C. Santus, E. Scrinzi, N. Pieroni. “Comportamento a fatica ad alta temperatura di palette di turbina a gas”. Congresso AIAS XLVII. Villa San Giovanni (RC) 2018.
F. Aiello, M. Beghini, M. Loffredo, B. D. Monelli, C. Santus, A. Bagattini. “Confronto tra metodi di misura delle tensioni residue su un disco estratto da un cilindro autoforzato”. Congresso AIAS XLVII. Villa San Giovanni (RC) 2018. Presentazione PDF

2017

L. Bertini, L. Le Bone, C. Santus, F. Chiesi, L. Tognarelli. “High Load Ratio Fatigue Strength and Mean Stress Evolution of Quenched and Tempered 42CrMo4 Steel”. Journal of Materials Engineering and Performance. Vol.26(8), pp.3784-3793, 2017. DOI: 10.1007/s11665-017-2845-x
L. Bertini, P. Neri, C. Santus, A. Guglielmo. “Automated Experimental Modal Analysis of Bladed Wheels with an Anthropomorphic Robotic Station”. Experimental Mechanics. Vol.57(2), pp.273-285, 2017. DOI: 10.1007/s11340-016-0223-5
T. Inoue, K. Wada, N. Osawa, M. Fujikubo, H. Suzuki, C. Santus. “Technical Investigation on Drill Pipe Failure”. Journal of the Japan Society of Naval Architects and Ocean Engineers. Vol.26, pp.183-193, 2017. DOI: 10.2534/jjasnaoe.26.183
M. Beghini, L. Bertini, C. Santus, B. D. Monelli, E. Scrinzi, N. Pieroni, I. Giovannetti. “High temperature fatigue testing of gas turbine blades”. Procedia Structural Integrity. Vol.7, pp.206-213, 2017. DOI: 10.1016/j.prostr.2017.11.079
L. Bertini, P. Neri, C. Santus, A. Guglielmo. “One exciter per sector test bench for bladed wheels harmonic response analysis”. Proceedings of the ASME Turbo Expo. Vol.7B, pp.GT2017-63628, 2017. DOI: 10.1115/GT2017-63628 Presentazione PDF
C. Santus, D. Taylor, M. Benedetti. “Optimal notched specimen parameters for accurate fatigue critical distance determination”. Procedia Structural Integrity. Vol.5, pp.817-824, 2017. DOI: 10.1016/j.prostr.2017.07.057 Presentazione PDF

2016

L. Bertini, C. Santus, A. Merlo, M. Bandini. “A fretting fatigue setup for testing shrink-fit connections and experimental evidence of the strength enhancement induced by deep rolling”. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. Vol.230(9), pp.1432-1439, 2016. DOI: 10.1177/0954406215612817
M. Barsanti, M. Beghini, L. Bertini, B. D. Monelli, C. Santus. “First-order correction to counter the effect of eccentricity on the hole-drilling integral method with strain-gage rosettes”. Journal of Strain Analysis for Engineering Design. Vol.51(6), pp.431-443, 2016. DOI: 10.1177/0309324716649529
L. Bertini, L. Le Bone, C. Santus, F. Chiesi, L. Tognarelli. “Fatigue investigation at high load ratio R of a quenched and tempered chromium molybdenum steel”. Procedia Structural Integrity. Vol.2, pp.681-689, 2016. DOI: 10.1016/j.prostr.2016.06.088
L. Bertini, C. Santus, A. Burchianti, N. Sakurai, T. Inoue. “Fatigue Testing of 5-1/2 FHMOD Pin-Box Drill Collar Tubular Connections with In-Plane Resonant Test Tig”. Congresso AIAS XLV. Trieste 2016. Presentazione PDF

2015

L. Bertini, C. Santus. “Fretting fatigue tests on shrink-fit specimens and investigations into the strength enhancement induced by deep rolling”. International Journal of Fatigue. Vol.81, pp.179-190, 2015. DOI: 10.1016/j.ijfatigue.2015.08.007
M. Beghini, L. Bertini, C. Santus, A. Guglielmo, G. Mariotti. “Partially open crack model for leakage pressure analysis of bolted metal-to-metal flange”. Engineering Fracture Mechanics. Vol.144, pp.16-31, 2015. DOI: 10.1016/j.engfracmech.2015.06.005
C. Santus. “Fretting fatigue of deep rolled shrink fitted samples”. Proceedings of the 4th International Conference on Fracture Fatigue and Wear. International Journal of Fracture Fatigue and Wear. Vol.3, pp.78-83, 2015.
L. Bertini, P. Neri, C. Santus. “Design and optimization of a compact high-frequency electromagnetic shaker”. Proceedings of ICoEV 2015 International Conference on Engineering Vibration. Paper N.170, pp.217-225. Ljubljana, 7-10 September 2015.
L. Bertini, L. Le Bone, C. Santus, F. Chiesi, L. Tognarelli. “Comportamento ciclico di un acciaio bonificato sottoposto ad elevato rapporto di carico”. XLIV congresso AIAS. Messina 2015.

2014

M. Beghini, L. Bertini, B. D. Monelli, C. Santus, M. Bandini. “Experimental parameter sensitivity analysis of residual stresses induced by deep rolling on 7075-T6 aluminium alloy”. Surface and Coatings Technology. Vol.254, pp.175–186, 2014. DOI: 10.1016/j.surfcoat.2014.06.008
L. Bertini, P. Neri, C. Santus, A. Guglielmo, G. Mariotti. “Analytical investigation of the SAFE diagram for bladed wheels, numerical and experimental validation”. Journal of Sound and Vibration. Vol.333(19), pp.4771–4788, 2014. DOI: 10.1016/j.jsv.2014.04.061
C. Santus. “Effetto del trattamento di rullatura sulla resistenza a fatica da fretting della connessione forzata albero-mozzo”. Trattamenti e finiture. Febbraio 2014, pp.30-38.
L. Bertini, B. D. Monelli, P. Neri, C. Santus, A. Guglielmo. “Robot Assisted Modal Analysis on a Stationary Bladed Wheel”. ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis. Copenhagen, Denmark, July 25-27, 2014. DOI: 10.1115/ESDA2014-20636 Presentazione PDF
M. Barsanti, M. Beghini, C. Santus, A. Benincasa, L. Bertelli. “Integral method coefficients and regularization procedure for the ringcore residual stress measurement technique”. Advanced Materials Research. Vol.996, pp.331-336, 2014. DOI: 10.4028/www.scientific.net/AMR.996.331
E. Valentini, A. Benincasa, C. Santus. “Bending test rig for validating the hole drilling method residual stress measurement”. Materials Science Forum. Vol.768-769, pp.150-157, 2014. DOI: 10.4028/www.scientific.net/MSF.768-769.150
M. Barsanti, M. Beghini, C. Santus. “Estensione del metodo integrale, considerando l’effetto di eccentricità, per la valutazione delle tensioni residue con i metodi del foro e della cava anulare”. Congresso AIAS XLIII. Rimini 2014. Presentazione PDF

2013

M. Benedetti, V. Fontanari, C. Santus. “Crack growth resistance of MAG butt-welded joints of S355JR construction steel”. Engineering Fracture Mechanics. Vol.108, pp.305–315, 2013. DOI: 10.1016/j.engfracmech.2013.01.019
M. Beghini, C. Santus. “An application of the weight function technique to inclined surface cracks under rolling contact fatigue, assessment and parametric analysis”. Engineering Fracture Mechanics. Vol.98, pp.153–168, 2013. DOI: 10.1016/j.engfracmech.2012.10.024
L. Bertini, B. D. Monelli, P. Neri, C. Santus, A. Guglielmo. “Explanation and Application of the SAFE Diagram”. 11^th International Conference on Recent Advances in Structural Dynamics. Pisa, 1-3 July 2013.
L. Bertini, G. Lovicu, C. Santus, R. Valentini. “Hydrogen effects on fatigue strength of a High Strength Low Alloy steel”. XXII Convegno Nazionale IGF. Roma, 1-3 July 2013.
C. Santus. “Effetto del trattamento di rullatura sulla resistenza a fatica da fretting della connessione forzata albero-mozzo”. Congresso AIAS XLII. Salerno 2013. Presentazione PDF
L. Bertini, B. D. Monelli, C. Santus, M. Manetti, M. Tognarelli. “Effetti della tensione media nel comportamento a fatica della ghisa grigia in condizioni di carico assiale”. Congresso AIAS XLII. Salerno 2013.

2012

C. Santus, M. Beghini, I. Bartilotta, M. Facchini. “Surface and subsurface rolling contact fatigue characteristic depths and proposal of stress indexes”. International Journal of Fatigue. Vol.45, pp.71-81, 2012. DOI: 10.1016/j.ijfatigue.2012.06.012
G. Lovicu, M. Bottazzi, F. D’Aiuto, M. De Sanctis, A. Dimatteo, C. Santus, R. Valentini. “Hydrogen Embrittlement of Automotive Advanced High-Strength Steels”. Metallurgical and Materials Transactions A. Vol.43(11), pp.4075-4087, 2012. DOI: 10.1007/s11661-012-1280-8
L. Bertini, C. Santus, J. Boulet, P. Leclerc, C. Desmazures. “Rotating fatigue tests of steel drill pipe connections with resonant test rig”. Exploration & Production: The Oil and Gas Review. Vol.10(1), pp.23-30. Touch Briefings 2012.
L. Bertini, C. Santus, J. Boulet, P. Leclerc, C. Desmazures. “Resonant bench for fatigue testing of Steel Drill Pipe connections”. Congresso AIAS XLI. Vicenza 2012. Presentazione PDF
M. Beghini, B. D. Monelli, C. Santus. “Stato di tensione residua di rullatura su elementi per prove di fatica da fretting con collegamento forzato albero mozzo”. Congresso AIAS XLI. Vicenza 2012. Presentazione PDF

2011

E. Valentini, M. Beghini, L. Bertini, C. Santus, M. Benedetti. “Procedure to Perform a Validated Incremental Hole Drilling Measurement: Application to Shot Peening Residual Stresses”. Strain. Vol.47(s1), pp.e605–e618, 2011. DOI: 10.1111/j.1475-1305.2009.00664.x
M. Beghini, L. Bertini, C. Santus, G. Mariotti. “Condizioni di risonanza per ruote palettate, definizione del diagramma SAFE”. Congresso AIAS XL. Palermo, 2011. Presentazione PDF
C. Santus, A. Benincasa, L. Bertelli. “Verifica mediante banco a flessione della misura di tensione residua, in superficie e a bassa profondità, con il metodo del foro”. Congresso AIAS XL. Palermo, 2011. Premio AIAS Capocaccia, migliore memoria giovani ricercatori. Paper PDF Presentazione PDF
E. Valentini, C. Santus, M. Bandini. “Residual stress analysis of shot-peened aluminum alloy by fine increment hole-drilling and X-ray diffraction methods”. Procedia Engineering. Vol.10, pp.3582-3587, 2011. DOI: 10.1016/j.proeng.2011.04.589
M. Beghini, C. Santus, E. Valentini, A. Benincasa. “Experimental verification of the hole drilling plasticity effect correction”. Materials Science Forum. Vol.681, pp.151-158, 2011. DOI: 10.4028/www.scientific.net/MSF.681.151

2010

M. Beghini, L. Bertini, C. Santus. “A procedure for evaluating high residual stresses using the blind hole drilling method, including the effect of plasticity”. Journal of Strain Analysis for Engineering Design. Vol.45(4), pp.301-318, 2010. DOI: 10.1243/03093247JSA579 CEGB Prize paper winner 2010 IMechE CEGB Prize Winning Papers
M. Benedetti, V. Fontanari, C. Santus, M. Bandini. “Notch fatigue behaviour of shot peened high-strength aluminium alloys: Experiments and predictions using a critical distance method”. International Journal of Fatigue. Vol.32(10), pp.1600-1611, 2010. DOI: 10.1016/j.ijfatigue.2010.02.012
M. Beghini, L. Bertini, C. Santus, C. Cagnarini, P. Romanello. “Modello di tenuta della flangia bullonata, senza guarnizione, mediante l’analogia della meccanica della frattura di una fessura parzialmente aperta”. Frattura ed Integrità Strutturale. Vol.11, pp.10-20, 2010. DOI: 10.3221/IGF-ESIS.11.02
G. Lovicu, M. Barloscio, M. Bottazzi, F. D’Aiuto, M. De Sanctis, A. Dimatteo, C. Federici, S. Maggi, C. Santus, R. Valentini. “Hydrogen Embrittlement of Advanced High Strength Steels for Automotive Use”. 2^nd International Conference Super High Strength Steels, Peschiera del Garda, 17-20 October 2010.
A. Ajovalasit, M. Scafidi, B. Zuccarello, M. Beghini, L. Bertini, C. Santus, E. Valentini, A. Benincasa, L. Bertelli. “The hole-drilling strain gauge method for the measurement of uniform or non-uniform residual stresses”. AIAS Working Group on Residual Stresses. AIAS – TR01:2010.
A. Ajovalasit, M. Beghini, A. Benincasa, L. Bertelli, L. Bertini, B. Petrucci, C. Santus, M. Scafidi, E. Valentini, B. Zuccarello. “Il metodo di prova AIAS – TR per la misura delle tensioni residue costanti o variabili con la tecnica del foro incrementale”. Congresso AIAS XXXIX. Maratea, 2010.
M. Beghini, L. Bertini, C. Santus, A. Benincasa, L. Bertelli, E. Valentini. “Validazione sperimentale di una rosetta a 6 griglie per ridurre l’errore di eccentricità nella misura delle tensioni residue”. Congresso AIAS XXXIX. Maratea, 2010. Presentazione PDF
M. Beghini, C. Santus, M. Facchini, A. Polacco. “Parametri indicatori della resistenza a fatica di contatto per ingranaggi di elevata durezza”. Congresso AIAS XXXIX. Maratea, 2010. Presentazione PDF
L. Bertini, M. De Sanctis, G. Lovicu, C. Santus, R. Valentini. “Metodologia per lo studio dell’infragilimento da idrogeno in lamiere sottili di acciai duttili”. 1^o Congresso del Coordinamento della Meccanica Italiana. Palermo, 20-22 giugno 2010.
L. Bertini, M. Beghini, C. Santus, G. Mariotti. “Metal to metal flanges leakage analysis”. American Society of Mechanical Engineers, Pressure Vessels and Piping Division, volume 6, pp.149-158, 2010. Presentazione PDF

2009

C. Santus, D. Taylor. “Physically short crack propagation in metals during high cycle fatigue”. International Journal of Fatigue. Vol.31(8-9), pp.1356-1365, 2009. DOI: 10.1016/j.ijfatigue.2009.03.002
C. Santus, L. Bertini, M. Beghini, A. Merlo, A. Baryshnikov. “Torsional strength comparison between two assembling techniques for aluminium drill pipe to steel tool joint connection”. International Journal of Pressure Vessels and Piping. Vol.86(2-3), pp.177-186, 2009. DOI: 10.1016/j.ijpvp.2008.09.007
C. Santus, L. Bertini, M. Beghini, A. Merlo, A. Baryshnikov. “Bending Fatigue Tests on Full-scale Drill Pipe Connections Used for Oil Drilling”. Exploration & Production: The Oil and Gas Review. Vol.7(2), pp.83-86. Touch briefings 2009.
M. Beghini, L. Bertini, C. Santus. “Valutazione di tensioni residue elevate con il metodo del foro, correzione dell’effetto della plasticità”. Congresso AIAS XXXVIII. Torino, 2009. Presentazione PDF
L. Bertini, M. Beghini, C. Santus, C. Cagnarini, P. Romanello. “Modello di tenuta della flangia bullonata senza guarnizione per compressori centrifughi”. Congresso AIAS XXXVIII. Torino, 2009. Presentazione PDF Video YouTube

2008

C. Santus. “Fretting fatigue of aluminum alloy in contact with steel in oil drill pipe connections, modeling to interpret test results”. International Journal of Fatigue. Vol.30(4), pp.677-688, 2008. DOI: 10.1016/j.ijfatigue.2007.05.006
L. Bertini, M. Beghini, C. Santus, A. Baryshnikov. “Resonant test rigs for fatigue full scale testing of oil drill string connections”. International Journal of Fatigue. Vol.30(6), pp.978-988, 2008. DOI: 10.1016/j.ijfatigue.2007.08.013
M. Benedetti, V. Fontanari, C. Santus. “Notch fatigue resistance of shot peened high-strength aluminium alloys: The role of residual stress relaxation”. International conference on fatigue damage of structural materials VII, Hyannis MA, USA, 2008. Presentazione PDF
L. Bertini, M. Beghini, C. Santus, A. Merlo, A. Baryshnikov. “Resistenza statica torsionale di connessioni acciaio – alluminio di aste innovative per perforazioni”. Congresso AIAS XXXVII. Roma, 2008. Presentazione PDF
E. Valentini, A. Benincasa, L. Bertini, M. Beghini, C. Santus. “Problematiche di misura delle tensioni residue con il metodo del foro nei pressi della superficie”. Congresso AIAS XXXVII. Roma, 2008. Presentazione PDF

2007

L. Bertini, C. Santus, R. Valentini, G. Lovicu. “New high concentration–high temperature hydrogenation method for slow strain rate tensile tests”. Materials Letters. Vol.61(11-12), pp.2509-2513, 2007. DOI: 10.1016/j.matlet.2006.09.047
M. Beghini, C. Santus. “Analysis of the plane contact with discontinuous curvature”. Meccanica. Vol.42(1), pp.95-106, 2007. DOI: 10.1007/s11012-006-9025-7
C. Santus, L. Bertini, M. Beghini. “Fretting fatigue apparatus for shrink-fitted shaft assembly”. Applied Mechanics and Materials. Vol.7-8, pp.43-48, 2007. DOI: 10.4028/www.scientific.net/AMM.7-8.43
M. Benedetti, C.L. Azanza Ricardo, C. Santus, V. Fontanari. “Studio dell’effetto della pallinatura sul comportamento a fatica della lega Al-7075-T651”. Congresso AIAS XXXVI. Napoli, 2007.
C. Santus, L. Bertini, M. Beghini. “Prove a fatica in piena scala su connessioni di elementi tubolari in alluminio per perforazione petrolifera”. Congresso AIAS XXXVI. Napoli, 2007. Presentazione PDF
E. Valentini, M. Benedetti, V. Fontanari, M. Beghini, L. Bertini, C. Santus. “Fine increment hole-drilling method for residual stress measurement, proposal of a calibrating apparatus”. Proceedings of the 13^th International Conference on Experimental Mechanics. Alexandroupolis, Greece, 2007. DOI: 10.1007/978-1-4020-6239-1_470 Presentazione PDF
F. Presicce, C. Santus. “Simulazioni FEM per l’analisi di ingranaggi cilindrici a denti dritti”. Progettare. Vol. Maggio, pp.138-143, 2007.

2006

C. Santus, F. Presicce, M. Beghini. “Proposal for Tip Relief Modification to Reduce Noise and Sensitivity to Meshing Conditions in Spur Gears”. Gear Technology. Vol.23(2), March, pp.34-40, 2006.
C. Santus, M. Beghini, L. Bertini. “Stato di tensione ed aspetti di fatica in elementi filettati per perforazione petrolifera”. Congresso AIAS XXXV. Ancona, 2006. Presentazione PDF
M. Beghini, L. Bertini, V. Fontanari, E. Manfredi, C. Santus. “Comportamento a fatica di strutture meccaniche”. Progettare. Vol. Luglio-Agosto 302, pp.129-132, 2006.
L. Bertini, M. Beghini, C. Santus, A. Baryshnikov. “Fatigue on Drill String Conical Thread Connections Test Results and Simulations”. 9^th International Fatigue Congress. Atlanta, GA, 2006. Presentazione PDF

2005

M. Beghini, F. Presicce, C. Santus. “Proposal for Tip Relief Modification to reduce Noise in Spur Gears and sensitivity to meshing conditions”. Proceedings VDI International Conference on Gears, Munich. VDI Berichte. Vol.1904 II, pp.1719-1734, 2005.
M. Beghini, L. Bertini, V. Fontanari, E. Manfredi, C. Santus. “Comportamento a fatica di strutture meccaniche in piena scala: risultati sperimentali e previsioni”. Atti Simposio IGF su: “Progettazione a fatica in presenza di multiassialità tensionali”. Ferrara, 6/7 giugno 2005. Presentazione PDF
V. Pinto, C. Santus. “Analisi del contatto di bordo in ingranaggi cilindrici”. Congresso AIAS XXXIV. Milano, 2005. Presentazione PDF
M. Beghini, L. Bertini, M. Lucifora, C. Santus. “Caratterizzazione a fatica di una lega di alluminio per aste di perforazione petrolifere”. Congresso AIAS XXXIV. Milano, 2005. Presentazione PDF

2004

M. Beghini, C. Santus. “Analysis of the contact between cubic profiles”. International Journal of Mechanical Sciences. Vol.46(4), pp.609-621, 2004. DOI: 10.1016/j.ijmecsci.2004.05.001
M. Beghini, F. Presicce, C. Santus. “A method to define profile modification of spur gear and minimize the transmission error”. Proceedings AGMA Fall Technical Meeting. Milwaukee, 2004. Presentazione PDF
M. Beghini, G.M. Bragallini, F. Presicce, C. Santus. “Influence of the linear tip relief modification in spur gears and experimental evidence”. Proceedings ICEM12. Bari, 2004. Presentazione PDF
M. Beghini, F. Presicce, C. Santus. “Influenza dei disallineamenti sulla trasmissione di ruote dentate cilindriche a denti dritti”. Congresso ADM-AIAS XXXIII. Bari, 2004.
M. Beghini, F. Presicce, M. Facchini, C. Santus. “Simulazioni LTCA mediante metodi FEM per l’analisi di ingranaggi cilindrici a denti dritti”. Congresso ADM-AIAS XXXIII. Bari, 2004. Presentazione PDF

2003

E. Manfredi, F. Presicce, C. Santus. “Strumenti Software per la progettazione di ingranaggi”. Progettare. Ott.-Nov.-Dic. Vol.271, pp.73-75. Vol.272, pp.71-74. Vol.273, pp.77-81, 2003.
M. Beghini, L. Bertini, C. Santus, R. Valentini. “Sviluppo di una tecnica innovativa per la caratterizzazione dell’infragilimento da Idrogeno”. Congresso AIAS XXXII. Salerno, 2003.