Pubblicazioni – Lista completa

@article{Giammarinaro2025413,

title = {Effect of 3D Printing Parameters on Mechanical Properties of Sintered Alumina},

author = {Guido Giammarinaro and Francesco Tamburrino and Francesco Marconcini and Armando V. Razionale and Fabrizio Paganucci},

url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-105002439821&doi=10.1007%2f978-3-031-72829-7_33&partnerID=40&md5=165e2011069a7d4f51b981ee073d8f0b},

doi = {10.1007/978-3-031-72829-7_33},

year  = {2025},

date = {2025-01-01},

journal = {Lecture Notes in Mechanical Engineering},

pages = {413 – 428},

abstract = {Alumina is a technical ceramic that finds several industrial applications due to its favorable mechanical, electrical, and chemical properties. For these reasons, it is often used as an electric insulator, a refractory material, and for wear-resistant components. Nevertheless, due to its hardness, alumina is hardly machinable, and conventional manufacturing technologies do not allow to create components that are characterized by complex shapes. Fortunately, the advent of 3D printing technologies gives the possibility to produce complex-shaped components made of technical ceramics at low cost and time-efficiently. One such technology is Fused Filament Fabrication, a material extrusion additive manufacturing technology initially developed for polymers but adapted to create metal and ceramic components as well. In this process, the printing parameters play a fundamental role since they can significantly impact the final density and the occurrence of internal defects of the sintered part. This paper presents the results of an experimental campaign conducted to assess the best printing parameters in terms of flow and printing temperature. To this mean, the statistical approach of the Design of Experiments was used, aiming to correlate the printing variables with relative density and flexural strength. The former achieved values as high as 99%, whereas the latter, measured by a 3-point bending test, reached up to 433 MPa. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.},

note = {Cited by: 0},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1307730,

title = {Virtual Reality as an Innovative Tool for Numerosity Perception},

author = {Beatrice Aruanno and Giovanni Anobile and ARMANDO VIVIANO Razionale and Monica Bordegoni and GUIDO MARCO Cicchini},

url = {https://www.mdpi.com/2076-3417/15/7/3976},

doi = {10.3390/app15073976},

year  = {2025},

date = {2025-01-01},

journal = {APPLIED SCIENCES},

volume = {15},

number = {7},

keywords = {numerosity estimation; virtual reality; perception; human–computer interaction},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1322115,

title = {Knowledge-based mathematical algorithm to design personalized dental alignment},

author = {B. Aruanno and S. Barone and M. Bordegoni and A. V. Razionale},

doi = {10.1007/s12008-025-02355-x},

year  = {2025},

date = {2025-01-01},

journal = {INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING},

keywords = {Design method; Knowledge formalization; Orthodontic treatment; Product customization},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1326004,

title = {Fused filament fabrication of alumina components for Hall thrusters},

author = {G. Giammarinaro and F. Marconcini and C. Guidi and F. Tamburrino and N. Orsini and M. M. Saravia and A. V. Razionale and F. Paganucci and G. Becatti},

doi = {10.1007/s44205-025-00118-0},

year  = {2025},

date = {2025-01-01},

journal = {JOURNAL OF ELECTRIC PROPULSION},

volume = {4},

number = {1},

keywords = {Additive manufacturing; Alumina; Electric propulsion; Fused filament fabrication; Hall thrusters; Hollow cathode},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1337488,

title = {Enhanced subpixel sensitivity in 3D-DIC via Spline-Based correlation map interpolation for vibration measurements},

author = {P. Neri and A. Paoli and A. V. Razionale and S. Barone},

doi = {10.1016/j.optlastec.2025.112958},

year  = {2025},

date = {2025-01-01},

journal = {OPTICS AND LASER TECHNOLOGY},

volume = {188},

pages = {1–14},

keywords = {Digital Image Correlation; Subpixel sensitivity; Vibration full-field measurements; Spline-based interpolation; Correlation map},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1337472,

title = {Design and Effect of a Resin Infiltration Method to Enhance the Interlayer Adhesion of Additively Manufactured PEEK Parts},

author = {Francesco Tamburrino and Beatrice Aruanno and Alessandro Paoli and Armando V. Razionale and Sandro Barone},

url = {https://www.mdpi.com/2073-4360/17/21/2819},

doi = {10.3390/polym17212819},

year  = {2025},

date = {2025-01-01},

journal = {POLYMERS},

volume = {17},

number = {21},

pages = {1–19},

keywords = {Fused Filament Fabrication; Polyether ether ketone PEEK; interlayer adhesion; resin infiltration; thermal post-processing},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1179208b,

title = {3D scanning of Upper Limb anatomy by a depth-camera-based system},

author = {Paolo Neri and Alessandro Paoli and Beatrice Aruanno and Sandro Barone and Francesco Tamburrino and Armando V. Razionale},

doi = {10.1007/s12008-023-01248-1},

year  = {2024},

date = {2024-01-01},

journal = {INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING},

number = {8},

pages = {1–12},

abstract = {The 3D reconstruction of upper limb anatomy plays a significant role in many biomedical fields such as ergonomics, motion rehabilitation, and prosthesis design. In the last few years, the technical advancement of consumer-grade depth cameras has supported the development of portable and low-cost optical 3D body scanners for healthcare applications. The real-time scanning of human body parts, however, still represents a complex task due to the non-stationary nature of the scanning target. This issue imposes that the scanning time must be reduced as much as possible to minimize scanning artifacts. In this regard, depth cameras can capture geometrical information at video frame rates, thus guaranteeing fast acquisition times. Furthermore, the simultaneous use of multiple sensors would minimize undercut geometries, which impair the 3D reconstruction’s completeness. In this work, a portable 3D optical scanner has been developed by rigidly assembling three Intel® RealSense™ D415 depth cameras on a lightweight circular frame. The three sensors are mutually calibrated, by using a 3D printed calibration specimen, to simultaneously align acquisitions from the three different camera viewpoints for each scanner pose. The system’s effectiveness has been assessed by acquiring the geometry of both a plaster hand and a human hand and comparing the results with those obtained by a high-end stationary structured light scanner. The developed system represents a low-cost handheld alternative to existing body scanners for collecting and storing 3D anatomical data, which can be used in the design process of bespoke medical devices.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1234400,

title = {An examination of auxetic componentry for applications in human-centred biomedical product design settings},

author = {Lewis Urquhart and Francesco Tamburrino and Paolo Neri and Andrew Wodehouse and Craig Fingland and ARMANDO VIVIANO Razionale},

url = {https://link.springer.com/article/10.1007/s12008-023-01682-1},

doi = {10.1007/s12008-023-01682-1},

year  = {2024},

date = {2024-01-01},

journal = {INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING},

number = {8},

pages = {1–11},

abstract = {This paper explores how the examination of additively manufactured auxetic componentry can be applied in human-centred design settings with particular focus on biomedical products. Firstly, the design applications of auxetics are detailed followed by a review of the key problems facing practical researchers in the field with the treatment of boundary conditions identified as a key issue. The testing setup that is then introduced utilises a novel method of part mounting and facilitates optical analysis and real-time force–displacement measurements. A study is advanced that analyses three different auxetic structures (re-entrant, chiral, and semi-rigid), a set of samples of which were additively manufactured in flexible TPU material. A range of parameters were varied across the three designs including interior geometry and wall thicknesses in order to demonstrate the effectiveness of the setup for the examination of the different structures. The results from these examinations are subsequently discussed and a number of suggestions made regarding how this kind of analysis may be integrated into novel design development workflows for achieving human-centred biomedical devices which often require detailed consideration of ergonomic and usability factors.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1227667,

title = {Biomechanical Effects of Different Auxiliary–Aligner Designs on the Rotation of an Upper Canine: A Finite Element Analysis of a Specific Patient},

author = {Vincenzo D’Antò and Tecla Bocchino and Carmine Levatè and Raffaele Buono and Armando Razionale and Sandro Barone and Roberto Savignano},

doi = {10.3390/app14062308},

year  = {2024},

date = {2024-01-01},

journal = {APPLIED SCIENCES},

volume = {14},

number = {6},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1162048b,

title = {A Digital Workflow for the Design and Additive Manufacturing of Multi-thickness Dental Aligners},

author = {B. Aruanno and S. Barone and M. Bordegoni and A. V. Razionale and F. Tamburrino},

doi = {10.14733/cadaps.2023.S6.111-121},

year  = {2023},

date = {2023-01-01},

journal = {COMPUTER-AIDED DESIGN AND APPLICATIONS},

volume = {20},

pages = {111–121},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1162040b,

title = {Automatic Point Clouds Alignment for the Reconstruction of Upper Limb Anatomy},

author = {Alessandro Paoli and Paolo Neri and Armando V. Razionale and Luca Di Angelo and Paolo Di Stefano and Emanuele Guardiani},

doi = {10.14733/cadaps.2023.S6.158-169},

year  = {2023},

date = {2023-01-01},

journal = {COMPUTER-AIDED DESIGN AND APPLICATIONS},

volume = {20},

number = {S6},

pages = {158–169},

abstract = {In the field of optical 3D scanning for healthcare applications, low-cost depth cameras can be efficiently used to capture geometry at video frame rates. However, the complete reconstruction of anatomical geometries remains challenging since different scans, collected from multiple viewpoints, must be aligned into a common reference frame. This paper proposes a fully automatic procedure to align scans of the upper limb patient’s anatomy. A 3D optical scanner, obtained by assembling three depth cameras, is used to collect upper limb acquisitions. A relevant dataset of key points on the hand and the forearm geometry is then determined and used to automatically obtain a rough 3D alignment of the different scans. Hand key points are identified through a neural network, which works on RGB images captured by the depth cameras; forearm key points are recognized by directly processing the point clouds through a specifically designed algorithm that evaluates the skeleton line of the forearm. The approach was tested on forearm acquisitions, and the results were compared to alternative alignment methodologies.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1196247,

title = {Effect of printing parameters on extrusion-based additive manufacturing using highly filled CuSn12 filament},

author = {B. Aruanno and A. Paoli and A. V. Razionale and F. Tamburrino},

url = {https://link.springer.com/article/10.1007/s00170-023-11919-8},

doi = {10.1007/s00170-023-11919-8},

year  = {2023},

date = {2023-01-01},

journal = {INTERNATIONAL JOURNAL, ADVANCED MANUFACTURING TECHNOLOGY},

pages = {1–14},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1154523,

title = {Automatic Algorithm to Design Bespoke Teeth Whitening Trays},

author = {B. Aruanno and F. Tamburrino and A. V. Razionale and S. Barone and M. Bordegoni},

url = {https://www.cad-journal.net/files/vol_20/Vol20No1.html},

doi = {10.14733/cadaps.2023.82-91},

year  = {2023},

date = {2023-01-01},

journal = {COMPUTER-AIDED DESIGN AND APPLICATIONS},

volume = {20},

number = {1},

pages = {82–91},

keywords = {automatic product design, custom teeth trays, dental whitening, digital process},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1113891,

title = {Low-speed cameras system for 3D-DIC vibration measurements in the kHz range},

author = {P. Neri and A. Paoli and A. V. Razionale and C. Santus},

doi = {10.1016/j.ymssp.2021.108040},

year  = {2022},

date = {2022-01-01},

journal = {MECHANICAL SYSTEMS AND SIGNAL PROCESSING},

volume = {162},

pages = {1–14},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1147359,

title = {A Digital Process for Manufacturing Customized Trays for Dental-Whitening Treatments},

author = {Francesco Tamburrino and Beatrice Aruanno and Armando V. Razionale and Sandro Barone and Marco Martini and Monica Bordegoni},

url = {https://www.mdpi.com/2227-9717/10/7/1232},

doi = {10.3390/pr10071232},

year  = {2022},

date = {2022-01-01},

journal = {PROCESSES},

volume = {10},

number = {7},

abstract = {This study presents an alternative process for designing and manufacturing customized trays for dental-whitening treatments. The process is based on a digitized approach consisting of three main stages: design of a reference model, its manufacturing by AM, and thermoforming of the tray. The aim of the study was to develop a high-performance tray, able to guarantee comfort, safety, and efficacy for whitening treatments. To evaluate the patient’s experience, some tests under real operating conditions were performed. Twenty people carried out a nighttime treatment of 14 days. Each patient was asked to assess the overall level of satisfaction and the comfort of the tray and its ability to retain the gel. Tooth whitening was also determined according to the VITAPAN scale. All patients involved in the study were satisfied and provided positive feedback about comfort and tightness of the tray. At the end of the treatment, 15 out of 20 patients achieved shade A1 on the VITAPAN scale. The mean improvement in color shades was about 7. These results confirmed the great potential of the proposed dental tray. Its use was proven to guarantee a high level of quality, flexibility, and customization of dental-whitening treatments, improving comfort, safety, and efficacy.},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1139188b,

title = {Predictability of Root Movements Using Virtual Root Setup in a Patient With Periodontal Disease Treated With Clear Aligners},

author = {S. Martina and M. Martini and M. Bordegoni and A. V. Razionale},

doi = {10.2174/1874210602115010605},

year  = {2021},

date = {2021-01-01},

journal = {THE OPEN DENTISTRY JOURNAL},

volume = {15},

number = {1},

pages = {605–611},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1139188,

title = {Predictability of Root Movements Using Virtual Root Setup in a Patient With Periodontal Disease Treated With Clear Aligners},

author = {S. Martina and M. Martini and M. Bordegoni and A. V. Razionale},

doi = {10.2174/1874210602115010605},

year  = {2021},

date = {2021-01-01},

journal = {THE OPEN DENTISTRY JOURNAL},

volume = {15},

number = {1},

pages = {605–611},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1102986,

title = {Post-processing treatments to enhance additively manufactured polymeric parts: a review},

author = {F. Tamburrino and S. Barone and A. Paoli and A. V. Razionale},

doi = {10.1080/17452759.2021.1917039},

year  = {2021},

date = {2021-01-01},

journal = {VIRTUAL AND PHYSICAL PROTOTYPING},

volume = {16},

number = {2},

pages = {218–251},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1034837b,

title = {Two coatings that enhance mechanical properties of fused filament-fabricated carbon-fiber reinforced composites},

author = {S. Barone and P. Neri and S. Orsi and A. Paoli and A. V. Razionale and F. Tamburrino},

url = {https://www.sciencedirect.com/science/article/pii/S2214860419314848?via=ihub},

doi = {10.1016/j.addma.2020.101105},

year  = {2020},

date = {2020-01-01},

journal = {ADDITIVE MANUFACTURING},

volume = {32},

pages = {1–9},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1114301b,

title = {Integrating CBCT and virtual models for root movement with clear aligners},

author = {Angela Chiara D'Alessandro and Vincenzo D'Antò and Armando V. Razionale and Giulio Allesandri-Bonetti},

year  = {2020},

date = {2020-01-01},

journal = {JOURNAL OF CLINICAL ORTHODONTICS},

volume = {54},

number = {3},

pages = {159–166},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1034837,

title = {Two coatings that enhance mechanical properties of fused filament-fabricated carbon-fiber reinforced composites},

author = {S. Barone and P. Neri and S. Orsi and A. Paoli and A. V. Razionale and F. Tamburrino},

url = {https://www.sciencedirect.com/science/article/pii/S2214860419314848?via=ihub},

doi = {10.1016/j.addma.2020.101105},

year  = {2020},

date = {2020-01-01},

journal = {ADDITIVE MANUFACTURING},

volume = {32},

pages = {1–9},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1064080,

title = {Sensor architectures and technologies for upper limb 3d surface reconstruction: A review},

author = {A. Paoli and P. Neri and A. V. Razionale and F. Tamburrino and S. Barone},

url = {https://www.mdpi.com/1424-8220/20/22/6584},

doi = {10.3390/s20226584},

year  = {2020},

date = {2020-01-01},

journal = {SENSORS},

volume = {20},

number = {22},

pages = {1–33},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1056505,

title = {Mechanical properties of thermoplastic polymers for aligner manufacturing: In vitro study},

author = {F. Tamburrino and V. D'Anto and R. Bucci and G. Alessandri-Bonetti and S. Barone and A. V. Razionale},

doi = {10.3390/dj8020047},

year  = {2020},

date = {2020-01-01},

journal = {DENTISTRY JOURNAL},

volume = {8},

number = {2},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1017881,

title = {3D acquisition and stereo-camera calibration by active devices: A unique structured light encoding framework},

author = {S. Barone and P. Neri and A. Paoli and A. V. Razionale},

doi = {10.1016/j.optlaseng.2019.105989},

year  = {2020},

date = {2020-01-01},

journal = {OPTICS AND LASERS IN ENGINEERING},

volume = {127},

pages = {1–12},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1016770b,

title = {Thickness of orthodontic clear aligners after thermoforming and after 10 days of intraoral exposure: a prospective clinical study},

author = {R. Bucci and R. Rongo and C. Levatè and A. Michelotti and S. Barone and A. V. Razionale and V. D’Antò},

url = {https://doi.org/10.1186/s40510-019-0289-6},

doi = {10.1186/s40510-019-0289-6},

year  = {2019},

date = {2019-01-01},

journal = {PROGRESS IN ORTHODONTICS},

volume = {20},

number = {36},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1016770,

title = {Thickness of orthodontic clear aligners after thermoforming and after 10 days of intraoral exposure: a prospective clinical study},

author = {R. Bucci and R. Rongo and C. Levatè and A. Michelotti and S. Barone and A. V. Razionale and V. D’Antò},

url = {https://doi.org/10.1186/s40510-019-0289-6},

doi = {10.1186/s40510-019-0289-6},

year  = {2019},

date = {2019-01-01},

journal = {PROGRESS IN ORTHODONTICS},

volume = {20},

number = {36},

keywords = {Aesthetic, Clear aligners, Dimensional stability, Intraoral ageing, Mechanical proprieties, Orthodontic appliance, Thermoforming, Thermoplastic},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_956868,

title = {Low-frame-rate single camera system for 3D full-field high-frequency vibration measurements},

author = {Sandro Barone and Paolo Neri and Alessandro Paoli and ARMANDO VIVIANO Razionale},

doi = {10.1016/j.ymssp.2019.01.016},

year  = {2019},

date = {2019-01-01},

journal = {MECHANICAL SYSTEMS AND SIGNAL PROCESSING},

volume = {123},

pages = {143–152},

keywords = {},

pubstate = {published},

tppubtype = {article}

}

@article{	11568_1016774,

title = {In vitro cytotoxicity of different thermoplastic materials for clear aligners},

author = {S. Martina and R. Rongo and R. Bucci and A. V. Razionale and R. Valletta and V. D'Anto},

url = {https://www.angle.org/doi/10.2319/091718-674.1},

doi = {10.2319/091718-674.1},

year  = {2019},

date = {2019-01-01},

journal = {ANGLE ORTHODONTIST},

volume = {89},

number = {6},

pages = {942–945},

keywords = {},

pubstate = {published},

tppubtype = {article}

}